Redarc Tow Pro Elite V3 Electric Brake Controller
Sydney Auto Installs can install a range of different brake controllers to your vehicle. We recommend the Redarc Tow Pro Elite V3 Electric Brake Controller for your 12v and 24v systems.
Do I need an electric brake controller in NSW?
Legislation in NSW states that trailers that weigh over GTM 2,000kgs must be fitted with electric brakes.
How do electric brakes work?
Electric brakes use a sensor controlled by the tow vehicle’s brake light signal. When the brakes are applied on the towing vehicle the brake controller applies brakes to the trailer by sending power down a separate circuit to the trailer brakes.
How to use electric brakes?
To use electric brakes your towing vehicle must have a electric brake controller installed. The Redarc Tow-pto Elite V3 required the module to be installed and also has a switch mounted on the dashboard so you can choose how much braking power you require manually.
Why do I need electric brakes?
The law states that trailer brakes are mandatory when the trailer GTM is over 2,000kgs. You will also require a breakaway system to ensure the trailer slows down in the event that your vehicle and towing trailer become disconnected. The electric brake system is to ensure the towing vehicle can brake safely without putting other road users in danger.
How do I install an electric brake controller?
We recommend that all brake controller installs are done by a qualified Auto Electrician. Sydney Auto Installs has over 15 year’s experience in the auto electrical industry and we can do this installation at your home. Vehicle Can Bus systems have changed the way installations on vehicles occur on our modern vehicles. The brake signal is given from the vehicle system to the electric brake controller and the brake controller applies the brakes on the trailer. In the installation process you must also ensure you are suppling the correct power supply to the brake controller and ensure you are using the correct size circuit breakers and ensure all wiring is ADR compliant.
How much does it cost to have a Redarc Tow Pro Elite V3 brake controller fitted?
The cost can vary from vehicle to vehicle and if you choose to have the additional Redarc harnesses and switch inserts. For a standard installation supply and fit of the Redarc Tow Pro Elite V3 will be $650.
Are electric brakes necessary?
Legislation in NSW states that trailers that weigh over GTM 2,000kgs must be fitted with electric brakes.
How do I choose a electric brake controller?
Electric brakes are one of your trailer’s top safety features and come installed on trailers over GTM 2,000kgs. But here’s the important piece of info: you can’t operate your trailer brakes without first installing a brake controller.
Sydney Auto Installs recommends installing the Redarc Tow Pro Elite V3 brake controller. This brake controller is one of the best on the market and is a high quality product.
Can I tow a trailer with electric brakes without a electric brake controller?
The electric brake system on the trailer can not work without an electric brake controller fitted on the vehicle.
